Spreading Wings S1000 Features
- Safe And Stable
- Portable Easy To Use
- Sparkproof Plug
- Professional Octocopter
- Low Gimbal Mounting Position
- Retractable landing gear
- ZENMUSE Z15-5D Gimbal
- New Damping Design
- Innovative Frame Arm Design
SAFE AND STABLE
The S1000’s V type mixer design provides large amounts of propulsion while improving power efficiency. Combined with a DJI flight controllers like the A2, it is guaranteed to remain stable even with the loss of a rotor. Integrated into the center frame is a power distribution system using our patented coaxial cable connector.
It is more efficient, reliable and easy to install and eliminates the need for soldering. All frame arms as well as the retractable landing gear are made from carbon fiber, ensuring light weight and high structural stability.
EASY TO USE
All eight arms can be completely folded down and the 1552 folding propeller can be tucked away, minimizing the S1000’s size for transportation. To fly, simply lift the frame arms up, lock them in place with the red clips and power up the system. This greatly saves on pre-flight prep time.
RETRACTABLE LANDING GEAR
Each frame arm has a built-in 40A electronic speed controller (ESC). When combined with its 4114 pro motor and high performance 1552 folding propellers, it is capable of a maximum thrust of 2.5Kg.
Its main power cord uses an AS150 sparkproof plug and an XT150 plug, preventing creators from mixing up polarity when plugging in the battery and preventing short circuits.
FRAME ARM DESIGN
Each frame arm is designed with an 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching yet more flexible when rotating.
Gimbal and battery are mounted to the same bracket, with dampers placed between the bracket and the frame. This significantly reduces high-frequency vibrations and makes shots clearer and sharper. The battery tray's position also makes it more stable and convenient for mounting and dismounting.
LOW GIMBAL MOUNTING POSITION
The gimbal is mounted low on the frame on a specially designed bracket. When combined with our retractable landing gear, it offers a clear and wide shooting angle.
- Diagonal Wheelbase: 1045mm
- Frame Arm Length: 386mm
- Frame Arm Weight (Including Motor, ESC, Propeller): 325g
- Center Frame Diameter: 337.5mm
- Center Frame Weight (with Landing Gear Mounting Base, Servos): 1330g
- Landing Gear Size: 460mm (Length) ×511mm (Width) ×305mm (Height), (Top width: 155 mm)
- Stator Size: 41×14mm
- KV: 400rpm/V
- Max Power: 500W
- Weight (with Cooling Fan): 158g
- Working Current: 40A
- Working Voltage: 6S LiPo
- Signal Frequency: 30Hz ~ 450Hz
- Drive PWM Frequency: 8KHz
- Weight (with Radiators): 35g
- Foldable Propeller (1552/1552R)
- Material: High strength performance engineered plastics
- Size: 15×5.2inch
- Weight: 13g
- Flight Parameters
- Takeoff Weight: 6.0Kg ~ 11.0Kg
- Total Weight: 4.2Kg
- Power Battery: LiPo (6S、10000mAh~20000mAh、15C(Min))
- Max Power Consumption: 4000W
- Hover Power Consumption: 1500W (@9.5Kg Takeoff Weight)
- Hover Time: 15min (@15000mAh & 9.5Kg Takeoff Weight)
- Working Environment Temperature: -10 °C ~ +40 °C
Wookong Flight Controller:
Needed to Complete:
- 7-Channel Aircraft Radio System (8-Channel recommended)
- 6S 10,000mAh ~ 15,000mAh LiPo battery (15C Min)
- Compatible Battery Charger