New Arrival
BlueBird BLS-1004 High Voltage (7.4V) Brushless Digital Servo w/Nanometer Alloy Gear
BlueBird BLS-1004 High Voltage (7.4V) Brushless Digital Servo w/Nanometer Alloy Gear
RM259.00  
Blue Bird BMS-660DMG+HS Super Strong Digital Servo (MG)
Blue Bird BMS-660DMG+HS Super Strong Digital Servo (MG)
RM100.00  
Blue Bird BMS-661DMG+HS Super Fast Digital Servo (MG)
Blue Bird BMS-661DMG+HS Super Fast Digital Servo (MG)
RM100.00  
Turnigy Micro Failsafe with Brake function
Turnigy Micro Failsafe with Brake function
RM40.00  
GoPro and AEE Magicam Live A/V Out FPV Cable 90deg Version
GoPro and AEE Magicam Live A/V Out FPV Cable 90deg Version
RM15.00  
Turnigy 500W 100~230V Power Supply (15V / 25V DC - 20amp)
Turnigy 500W 100~230V Power Supply (15V / 25V DC - 20amp)
RM299.00  
Turnigy 9XR Transmitter Mode 1 w/FrSky DJT Combo
Turnigy 9XR Transmitter Mode 1 w/FrSky DJT Combo
RM449.00  
Turnigy 9XR Safety Protected 11.1v (3s) 2200mAh 1.5C Transmitter Pack
Turnigy 9XR Safety Protected 11.1v (3s) 2200mAh 1.5C Transmitter Pack
RM69.00  
Turnigy Nano-Tech 2100mAh 2S1P 20C LiFePo4 Transmitter Pack (Futaba T14SG)
Turnigy Nano-Tech 2100mAh 2S1P 20C LiFePo4 Transmitter Pack (Futaba T14SG)
RM65.00  
Turnigy 9XR Transmitter Mode 2 w/FrSky DJT Combo
Turnigy 9XR Transmitter Mode 2 w/FrSky DJT Combo
RM449.00  
Quanum 7inch Auto Scan 32CH 5.8GHz Diversity Monitor With Built In Battery
Quanum 7inch Auto Scan 32CH 5.8GHz Diversity Monitor With Built In Battery
RM599.00  
KK2.1.5 Multi-Rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
KK2.1.5 Multi-Rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
RM135.00  
Turnigy 9XR Transmitter Mode 2 (No Module)
Turnigy 9XR Transmitter Mode 2 (No Module)
RM269.00  
Turnigy HV SBEC 5A Switch Regulator (8-42V input)
Turnigy HV SBEC 5A Switch Regulator (8-42V input)
RM49.00  
Turnigy Laser Guided Infrared Thermometer
Turnigy Laser Guided Infrared Thermometer
RM110.00  
Servo Tape (Clear) 25mm x 1m
Servo Tape (Clear) 25mm x 1m
RM25.00  
TURNIGY 3A UBEC w/ Noise Reduction
TURNIGY 3A UBEC w/ Noise Reduction
RM28.00  
KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer
KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer
RM160.00  
ZIPPY Compact 1000mAh 3S 25C Lipo Pack
ZIPPY Compact 1000mAh 3S 25C Lipo Pack
RM35.00  
ZIPPY Compact 2200mAh 3S 25C Lipo Pack
ZIPPY Compact 2200mAh 3S 25C Lipo Pack
RM59.00  
ZIPPY Compact 2200mAh 3s 60c Lipo Pack
ZIPPY Compact 2200mAh 3s 60c Lipo Pack
RM85.00  
ZIPPY Compact 2200mAh 3s 40c Lipo Pack
ZIPPY Compact 2200mAh 3s 40c Lipo Pack
RM69.00  
Turnigy T-20Pro Quality 16A Power Supply 180~240V (220W)
Turnigy T-20Pro Quality 16A Power Supply 180~240V (220W)
RM130.00  
Turnigy Hand Fuel Pump
Turnigy Hand Fuel Pump
RM35.00  
TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly
TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly
RM85.00  
More information on product
Home >Products >Cars & Parts >Tools & Accessories >Drift Accessories >RC Drift Car Electronic Stabilizer / Balancer
RC Drift Car Electronic Stabilizer / Balancer

RC Drift Car Electronic Stabilizer / Balancer

Rating: 0 out of 100 - based on 0 review(s) | Write Review | Add to Compare
RM55.00  
Item details
SKU: DriftStablilizer
Weight: 100 grams
Stock: Out of stock

  Add To Facebook   Add To MySpace

If you love playing or going to start playing with RC drift cars. This little device is a MUST have component! Controlling a drift car sometime is quite difficult. It might keep turning around and around while you are making turn with it. However, this problem can be solved easily by installing this little device!

This electronic stabilizer will adjust the servo (steering) accordingly with your car. When it is over turning, it will adjust the servo and bring it back to the right track!

It is not only for drift cars, but also suitable for trucks and buggies. When running on a rough surface, it can also help for balancing your car!

How to use?

Just connect the steering servo to this device and connect this device to the receiver to the slot which is originally for the servo. And it is all ready! No other setting is needed, except turning the sensitivity for balancing!

It is recommended to place this device at the front middle of the car to get the best performance.

Features:

  Electronic Auto-balance.
  Easy to install. "Plug and play".
  Compact and light weight.
  Best for Drift!

Specification:
Voltage : 4.8 - 6V
Current Draw : 10mA (4.8V)
Gain Adjustment :
Single rate, non-remote
Operating Temperature : -5C - 60C
Dimension : 26 x 27 x 11mm
Weight : ~7g
Gross Weight : 25g